Starting Up
Turning the Power On/Off
Turning the Power On
Connect a set of
(optional) headphones to
the TYROS.
Make sure that the [MASTER VOLUME] and [INPUT VOLUME]
are set to "MIN" and turn the TYROS on by pressing the
[POWER ON/OFF] switch.
Turning the Power Off
If necessary, save any data you've created using the TYROS' features to the User or Disk drive.
Make sure that the [MASTER VOLUME] and [INPUT VOLUME]
are set to "MIN" and turn the TYROS off by pressing the
[POWER ON/OFF] switch.
22
TYROS Owner's Manual
Set up the Power Supply.
Install and connect the optional TRS-MS01
speaker system to the TYROS (page 160).
Then, turn on the optional TRS-MS01
speaker system.
Turn off the optional TRS-MS01
speaker system.
See page 20.
Connect any external devices or auxiliary
equipment (such as a computer, MIDI
instruments, audio equipment, micro-
phone, etc.) to the TYROS.
POWER
ON /
OFF
Turn on all connected external devices
and auxiliary equipment.
See page 69.
If necessary, save any data you've created
using the connected external devices to the
appropriate media.
Turn off all connected external devices
and auxiliary equipment.
POWER
ON /
OFF