Yamaha TYROS Owner's Manual page 163

5
Remove the hard disk cover, turn it face down and remove the four screws from the center.
6
Attach the hard disk unit to the hard disk cover using the screws you removed in step #5.
7
Replace the hard disk drive and cover (included with the hard disk) by fitting it into the
TYROS as shown in the illustration.
Make sure not to bend the pins.
In the middle of the hard disk con-
nector is a "missing" pin. Make sure
to align the cable connector (which
has a corresponding "missing"
hole) to the hard disk as shown.
8
Replace the hard disk cover, and attach it with the four screws removed in step #4.
9
Replace the cover and attach it with the six screws removed in step #3.
10
Check that the installed hard disk is functioning properly.
You should tighten these two
screws first.
Make sure the bottom of the hard disk is
facing up. Depending on the type of hard
disk drive you plan to install, select holes
(A) or holes (B) to attach the hard disk
drive.
* Holes (A) are used in this illustration.
These four pins are unused.
Turn on the power, go to the [FUNCTION]
→ UTILITY → DISK display, and execute
the HD Format function (page 157). If the
format is completed with no trouble and the
HD drive tab appears on the Open/Save
display, the hard disk is OK.
Appendix
Installing an Optional Hard Disk
• If you have installed a hard disk that
was once used for the PSR-8000 and
turn the TYROS' power on, a message
appears prompting you to convert the
data on the hard disk for use with the
TYROS. If you select "YES," the files
on the hard disk will be converted so
that they can be viewed on the
TYROS' LCD display — however, they
will not be accessible. To actually use
the files on the TYROS, you will need
to convert the PSR-8000 data using a
computer and the File Converter soft-
ware (contained in the included CD-
ROM).
• If you have installed the hard disk that
was once used for the PSR-9000/
9000Pro and turn the TYROS' power
on, you can immediately view the files
on the hard disk and use the song files
from the PSR-9000/9000Pro. How-
ever, to properly use the style, Multi
Pad, and Registration Memory files
from the PSR-9000/9000Pro, you will
need to convert the data using a com-
puter and the File Converter software
(contained in the included CD-ROM).
TYROS Owner's Manual
163