Naming Folders/Files - Yamaha TYROS Owner's Manual

Basic Operations — Organizing Your Data
Folder/File Operations using the Open/Save Display

Naming Folders/Files

Folders and files on the installed drives can be freely renamed. You can also name files you've created.
The instructions below apply when calling up the Name operation from the Open/Save display. For other cases, go directly to
step #5 below.
1
Call up the page (path) of the Open/Save display, where the relevant folders/files are
located.
2
Press the [NAME] LCD button (lower [1] button) at the bottom the LCD display.
The pop-up window for the Name operation appears at the bottom of the display. To return to the
original display, press the [CANCEL] LCD button.
3
Select the desired folder or file to be named.
4
Press the [OK] LCD button (lower [7] button).
The pop-up window for entering the name appears at the bottom of the display. To return to the orig-
inal display, press the [CANCEL] LCD button.
5
Input the name of the selected folder or file.
Move the cursor to the desired position by using
DATA ENTRY
the [DATA ENTRY] dial.
ENTER
Press the appropriate button,
corresponding to the character
you wish to enter.
Several different characters are
assigned to each button, and
the characters change each
time you press the button.
To actually enter the selected
character, move the cursor or
press another letter-input but-
ton.
Call up the ICON SELECT display by pressing the lower [1] button.
This lets you change the icon at the left of the file name.
Change the type of character by using the [1] up button.
G If you select Japanese as the Language in the [FUNCTION] → UTILITY → OWNER display
(page 158), the following different types of characters and sizes can be entered:
• (kana-kan).... Hiragana and kanji, marks (full size)
• (kana) .............. Katakana (normal size), marks (full size)
• (kana) ................ Katakana (half size), marks (half size)
• ABC ...................... Alphabet (capital and small letters, full size), numbers (full size),
marks (full size)
• ABC ......................... Alphabet (capital and small letters, half size), numbers (half size),
marks (half size)
G If you've selected a language other than Japanese in the [FUNCTION] → UTILITY →
OWNER display (page 158), the following types of characters are available:
• CASE ........... Alphabet (capital letters, half size), numbers (half size), marks (half size)
• case ............. Alphabet (lowercase letters, half size), numbers (half size), marks (half
size)
6
Press the [OK] LCD button (lower [8] button) to actually enter the new name for the
item and return to the original display.
70
TYROS Owner's Manual
Press the [OK] LCD button (upper [8] button) to
actually enter the new name and return to the
original display.
Press the [CANCEL] LCD button (lower [8] but-
ton) to delete all of the characters on the line at
once and return to the original display.
Deletes the character at the cursor.
Pressing this (lower [6] button) before actual entry of the character adds a special charac-
ter mark (umlaut, accent, Japanese "
Pressing this (lower [6] button) after actually entering a character calls up the miscella-
neous character list. Move the cursor to the desired mark by using the [DATA ENTRY] dial,
then press the [OK] LCD button (upper [8] button) or [ENTER] button to enter the character
and return back to the Name original pop-up window.
Select the desired upper row menu by using
the upper LCD [1] - [8] buttons.
1 2 3 4 5 6
Select the desired lower row menu by using the
lower LCD [1] - [8] buttons.
" and " ") to the character.
• The example pop-up menu shown here
appears when the Language parameter is set
to "ENGLISH" on the [FUNCTION] → UTIL-
ITY → OWNER display (page 158) and the
type of characters here is set to "ABC (half
size)."
7 8