Appendix; Installing The Optional Speakers - Yamaha TYROS Owner's Manual

Appendix

Installing the Optional Speakers

Make sure that you have all of the parts below, included in the TRS-MS01 speaker package, as well as a Phillips
screwdriver to assemble the system.
Satellite Subwoofer
speakers (2) speaker (1)
1
Turn the TYROS' power off, and disconnect the AC power cord. Also, make
sure to disconnect the keyboard from any other external devices.
2
Remove the four screws from the rear panel of the TYROS.
TO RIGHT SPEAKER
3
Using the screws you removed in step #2 above, fasten the two speaker
brackets to the rear panel of the TYROS.
ASSIGNABLE FOOT PEDAL
TO RIGHT SPEAKER
1 2
(SUSTAIN) (DSP VARIATION)
4
Fasten the satellite speakers to the left and right brackets.
Place the speaker on
the bracket.
5
Use the RCA pin cables to connect the speakers to the respective outputs
on the TYROS.
160
TYROS Owner's Manual
Speaker
brackets (2)
ASSIGNABLE FOOT PEDAL MIDI A MIDI B
VIDEO OUT USB
1 2 3 IN OUT IN OUT
(SUSTAIN) (DSP VARIATION) (VOLUME) NTSC / PAL
MIDI A MIDI B
VIDEO OUT USB
3 IN OUT IN OUT
NTSC / PAL
(VOLUME)
Adjust the direction of the speaker as desired,
then fasten it securely to the bracket.
RCA pin RCA pin/8-pin
cables (2) combination cable (1)
LINE OUT AUX IN / LOOP RETURN
SUB MAIN TRIM R L /L+R
2 1 R L/L+R MIN MAX
Installation screws for
speaker brackets
LINE OUT AUX IN / LOOP RETURN LOOP SEND LOOP SEND
SUB MAIN
TRIM R L /L+R R R L /L+R L/L+R
2 1 R L/L+R
MIN MAX
TO SUB
LOOP SEND LOOP SEND MIC / LINE IN
WOOFER
R R L/L+R L /L+R INPUT TRIM AC INLET TO LEFT SPEAKER
R L
MIN MAX
• Either bracket can be fastened to
either location.
TO SUB
MIC / LINE IN
WOOFER
AC INLET TO LEFT SPEAKER
INPUT TRIM R L
MIN MAX
• Either speaker can be placed on
either bracket.
• If you want to change the direction
of the satellite speaker, unfasten it
from the bracket by rotating the
lever, then adjust the speaker
position as desired, and fasten it
to the bracket again.
• Either cable can be used for either
location.