Start Recording - Yamaha TYROS Owner's Manual

3
Make the desired panel settings for your keyboard performance.
(Refer to the list of possible settings in step #3 of Quick Recording
above.)
4

Start recording.

Recording is started in the same way as in Quick Recording.
5
Press the [REC] button to stop recording.
6
Listen to your newly recorded performance.
Press the [TOP] button so that the song playback position returns back to the top, then
press the SONG CONTROL [START/STOP] button.
REC
NEW SONG
7
If desired, record another channel.
Repeat steps #2 - #6 above.
8
Make sure to save the song data to the USER or FD drive when
recording is completed.
Call up the USER or FD page of the Song selection (Open/Save) display and execute
the save. For details, see step #8 on page 55.
I Re-recording or editing the already-recorded song
Here in the "Quick Guide," you've learned how to create a new song by recording. The
following features of the Song Creator function allow you to re-record or edit the already-
recorded song.
G Re-recording a specific section of the already-recorded song (Punch In/Out) .................... Page 94
G Editing the recorded data for each channel
• Quantizing, or aligning the timing................................................................................ Page 96
• Deleting the data of the specified channel .................................................................. Page 96
• Mixing (Merging) the data of the specified two channels ............................................ Page 97
• Transposing the recorded note data of each channel................................................. Page 97
• Initial settings such as voice, volume, tempo and so on ............................................. Page 97
G Editing the chord data by using the Event List..................................................................... Page 98
G Editing the channel data by using the Event List ............................................................... Page 100
G Editing the System Exclusive message data by using the Event List................................ Page 106
G Editing the lyric data by using the Event List ..................................................................... Page 106
Recording Your Performances and Creating Songs — Song Recording
START/
REC TOP STOP REW
NEW SONG SYNC START
START/
TOP STOP REW FF
SYNC START
FF
START/
REC TOP STOP REW
NEW SONG SYNC START
..............................
Quick Guide
• When recording without style play-
back, using the Metronome func-
tion (page 156) can make your
recording sessions much more
efficient.
FF
• The recorded song will be lost if
you change another song or
you turn the power off without
executing the save operation in
step #8. Make sure to execute
the save operation in step #8.
TYROS Owner's Manual
57