Setting Up; Power Requirements; Turning The Power On/Standby; Auto Power Off Function - Yamaha P-125a Owner's Manual

Hide thumbs Also See for P-125a:
Table of Contents

Advertisement

Setting Up

Power Requirements

Connect the AC adaptor in the order shown in the
illustration.
DC IN jack
(page 9)
q
WARNING
• Use the specified AC adaptor (page 25) only. Using the
wrong AC adaptor can result in damage to the instrument
or overheating.
WARNING
• When using the AC adaptor with a removable plug, make
sure to keep the plug attached to the AC adaptor. Using the
plug alone can cause electric shock or fire.
• Never touch the metallic section when attaching the plug.
To avoid electric shock, short circuit or damage, also be
careful that there is no dust between the AC adaptor and
plug.
* The shape of the plug differs depending on your area.
WARNING
• When setting up the product, make sure that the AC outlet
you are using is easily accessible. If some trouble or mal-
function occurs, immediately turn the power off and dis-
connect the plug from the outlet.
NOTE
• Follow the order shown above in reverse when disconnecting the AC adaptor.
10
P-125a Owner's Manual
w
AC outlet
AC adaptor
Plug
Slide the plug as
indicated.

Turning the Power On/Standby

q Turn down the [MASTER VOLUME] to "MIN".
w Press the [
] (Standby/On) switch to turn the
power on.
q
The [
] (Standby/On) switch lights up. Adjust
the volume as desired while playing the keyboard.
e Press and hold the [
about a second to turn the power to standby mode.
WARNING
• Even when the power switch is turned off, electricity is still
flowing to the product at the minimum level. When you are
not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.

Auto Power Off Function

To prevent unnecessary power consumption, this
function automatically turns the power off if the
instrument is not operated for 30 minutes.
To disable/enable the Auto Power Off function
Default setting: Enable
q
While holding
down
When the power is off, turn the power on while hold-
ing down the lowest key disables Auto Power Off. The
[
] lamp flashes three times, indicating that the Auto
Power Off function has been disabled.
NOTICE
• If your digital piano is connected to other equipment such
as amplifiers, speakers, or a computer but you do not
intend to use it for 30 minutes, we recommend that you
turn off all devices as described in their owner's manuals.
Doing so eliminates the risk of damage to the other equip-
ment. If you do not want the instrument to turn off auto-
matically when connected to other equipment, disable the
Auto Power Off function.
w
] (Standby/On) switch for
A#0: Enable
A0: Disable
Lowest
key
w

Advertisement

Table of Contents
loading

Table of Contents