Yamaha TYROS Owner's Manual page 161

6
Use the RCA pin/8-pin combination cable to connect the subwoofer speaker to the
respective outputs on the TYROS.
7
Connect the power plugs of the TYROS and the subwoofer to an appropriate AC outlet.
8
First, set the volume controls (MASTER VOLUME on the TYROS and BASS on the sub-
woofer) to minimum. Finally, turn on the power of the subwoofer, then the TYROS.
Turn the TYROS on.
9
Adjust the volume controls (MASTER VOLUME on the TYROS and BASS on the sub-
woofer) to appropriate levels.
TYROS
Sub-Woofer
MASTER VOLUME
MIN MAX
Turn the subwoofer on
(from the rear panel)
POWER
ON / OFF
Installing the Optional Speakers
BASS
0 10
TYROS Owner's Manual
Appendix
161