Selecting Encoder Modes - Yamaha DM2000 Owner's Manual

Selecting Encoder Modes

The exact function of each Encoder depends on the selected Layer and Encoder
mode. There are two preset Encoder modes, Pan and Aux/Mtrx, and four assign-
able modes, for which you can choose from over 40 parameters.
1 Select a Layer, as explained in page 58.
Use the ENCODER MODE buttons to select
2
an Encoder mode.
[PAN]: Encoders function as Pan controls. When
you press the Encoder push-switches, the current
Pan positions appear on the channel strip displays.
[AUX/MTRX]: Encoders control Aux or Matrix
Send levels, depending on the selected Layer. When
you press the Encoder push-switches, the currently-selected Aux or Matrix Send levels
appear on the channel strip displays.
[ASSIGN 1–4]: Encoders control the parameters assigned to the ASSIGN buttons. See
"Assigning Parameters to the ENCODER MODE Assign Buttons" on page 62 for more
information.
The indicator of the currently selected ENCODER MODE button lights up.
The following table shows the exact Encoder functions for each Layer and Encoder mode.
Layer
1–24
25–48
49–72
73–96
Master
Remote
1–4
1. When Alt Layer is assigned, the Encoders enable you to control a parameter that is assigned to the cor-
responding channel fader in the partner layer. (A partner layer would be the layer of channels 25-48
if the layer of channels 1-24 is currently selected, or the layer of channels 73-96 if the layer of channels
49-72 is currently selected.)
The values of the parameters being controlled by the Encoders are displayed graphically by
the channel strip displays. See "Channel Strip Displays" on page 55 for more information.
Encoder
Mode
1–8
Pan
Aux/Mtrx
Assign 1–4
Pan
Aux/Mtrx
Assign 1–4
Pan
Aux/Mtrx
Assign 1–4
Pan
Aux/Mtrx
Assign 1–4
Pan No operation
Bus Out 1–8:
Aux/Mtrx
Matrix Send level
Bus Out 1–8:
Assign 1–4
assigned parameter
Pan
Aux/Mtrx
See "About Remote Layers" on page 253 for more information.
Assign 1–4
Selecting Encoder Modes
ENCODER MODE
DISPLAY
PAN
PAN
ASSIGN
INPUT
Encoder
9–16 17–20
CH 1–24: pan
CH 1–24: Aux Send level
CH 1–24: assigned parameter
CH 25–48: pan
CH 25–48: Aux Send level
CH 25–48: assigned parameter
CH 49–72: pan
CH 49–72: Aux Send level
CH 49–72: assigned parameter
CH 73–96 pan
CH 73–96: Aux Send level
CH 73–96: assigned parameter
No operation
Aux Send 1–12:
Matrix Send level
Aux Send 1–12:
assigned parameter
Operation depends on the selected target.
DM2000 Version 2—Owner's Manual
61
AUX/ MTRX
SEND LEVEL
1 2 3 4
ASSIGN ASSIGN ASSIGN
OUTPUT SEND ASSIGN INSERT
21–24
1
1
1
1
Matrix 1–4: Balance
No operation
Matrix Send 1–4:
assigned parameter