Yamaha DM2000 Owner's Manual page 323

DELAY->ER.
One input, two output delay and early reflections effects in series.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
DLY.BAL 0–100%
S-Hall, L-Hall, Random,
TYPE
Revers, Plate, Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI. DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
SYNC OFF/ON
1
NOTE L
NOTE R 1
NOTE FB 1
1.
DELAY+REV
One input, two output delay and reverb effects in parallel.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
DELAY HI 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
DLY/REV 0–100%
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
SYNC OFF/ON
1
NOTE L
NOTE R
1
NOTE FB
1
1.
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and early reflected delay balance (0% = all early reflected
delay, 100% = all delay)
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Spread
Reverb density
Number of early reflections
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel DELAY L
Used in conjunction with TEMPO to determine right channel DELAY
R
Used in conjunction with TEMPO to determine FB. DLY
(Maximum value depends on the tempo setting)
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
Delay high-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and reverb balance (0% = all delay, 100% = all reverb)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel DELAY L
Used in conjunction with TEMPO to determine right channel DELAY
R
Used in conjunction with TEMPO to determine FB. DLY
(Maximum value depends on the tempo setting)
323
Effects Parameters
DM2000—Owner's Manual