Synchronizing The Tf Series And Tio1608-D; Selecting The Input Source - Yamaha Tio1608-D Setup Manual

TF Series & Tio1608-D

Synchronizing the TF Series and Tio1608-D

The TF series and Tio1608-D will automatically sync up about one minute
after turning on the power switches, provided that the connections and
settings have already been made. The synchronization status can be
confirmed on the SLOT SETUP screen. Once the Sync indicators on the
SLOT SETUP screen turn green, synchronization is complete.

Selecting the input source

Configure the input source for each INPUT channel. The Quick Config
function will enable automatic Dante patching between the TF Series slot
and the Tio1608-D; however, the input source must be selected manually
for each INPUT channel on the TF Series. Open the screen for each INPUT
channel, and select SLOT for the input source.
Input sources can also be set for multiple channels simultaneously. Open
the menu screen on the INPUT screen by pressing the menu key, and
select All SLOT to switch all the designated input sources at the same time.
5 www.yamahaproaudio.com