Zooming; Making Fine Adjustments To The Selected Region - Yamaha DM2000 Owner's Manual

248
Chapter 19—Pro Tools Remote Layer

Zooming

The cursor buttons can be used to zoom the Edit window as follows.
Use the [+INC] (CURSOR MODE) button to select Zoom cursor mode.
1
The CURSOR MODE section of the display shows "ZOOM."
In Zoom cursor mode, the cursor buttons work as follows:
• Left cursor button: Zoom out horizontally.
• Right cursor button: Zoom in horizontally.
• Up cursor button: Zoom in vertically.
• Down cursor button: Zoom out vertically.

Making Fine Adjustments to the Selected Region

The cursor buttons can be used in conjunction with the Parameter wheel to make fine
adjustments to the selected region.
Use the [+INC] (CURSOR MODE) button to select Select cursor mode.
1
The CURSOR MODE section of the display shows "SELECT."
While holding down the left cursor button, turn the Parameter wheel to
2
make fine adjustments to the in point of the selected region.
While holding down the right cursor button, turn the Parameter wheel to
3
make fine adjustments to the out point of the selected region.
The following shortcuts apply.
Move the edit cursor to the in point of the
selected region
Move the edit cursor to the out point of
the selected region
The following shortcuts can be used in either Navigation or Select cursor mode.
Select the track/region below
Select the track/region above
Extend the selection to include the same
region on the track below
Extend the selection to include the same
region on the track above
Shorten the selection by unselecting the
region on the lowest track
Shorten the selection by unselecting the
region on the highest track
Move the selection (not the audio) back-
wards or forwards
DM2000 Version 2—Owner's Manual
To do this...
To do this...
Do this!
Double-click the Left cursor button
Double-click the Right cursor button
Do this!
Down cursor button
Up cursor button
USER DEFINED KEYS [4] + Down cursor button
USER DEFINED KEYS [4] + Up cursor button
USER DEFINED KEYS [5] + Down cursor button
USER DEFINED KEYS [5] + Up cursor button
Left cursor button+Right cursor button+Parameter wheel