Yamaha DM2000 Owner's Manual page 233

Control Surface Operation with the Pro Tools Remote Layer
TRACK ARMING Section
[1–24] (REC/RDY) buttons
These buttons are used to arm Pro Tools channels for recording. The button indicators of
channels that are armed flash. The button indicators of armed channels light continuously
when recording starts.
[MASTER] (REC/RDY ALL) button
This button is used to arm all Pro Tools channels for recording. The button indicators of all
channels flash when this button is pressed. All channels can be disarmed by pressing it
again, in which case all button indicators go out. The number of channels that can be armed
depends on the number of recordable tracks in the current Pro Tools session.
The following shortcuts apply.
To do this...
Arm all channels (same as [MASTER]
(REC/RDY ALL) button
Arm all selected channels
AUTOMIX Section
[DISPLAY] (AUTO STATUS) button
When this button is pressed, the Automation modes of all channels are displayed on the
channel strip displays. See "Viewing the Automation Mode" on page 250 for more informa-
tion.
[ENABLE] (SUSPEND) button
This button is used to suspend all automation recording and playback operations. Its but-
ton indicator flashes while automation is suspended. Level and other channel strip settings
are left as they are while automation is suspended.
TRACK ARMING
1 2 3 4
9 10 11 12
17 18 19 20
USER DEFINED KEYS [5] + TRACK ARMING [1–24]
USER DEFINED KEYS [5] + USER DEFINED KEYS [4] + TRACK
ARMING [1–24]
AUTOMIX
DISPLAY
(AUTO STATUS)
ENABLE REC ABORT/
UNDO
SUSPEND WRITE TOUCH
OVERWRITE
FADER ON PAN
(FADER) (MUTE)
PAN
5 6 7 8
13 14 15 16
21 22 23 24
MASTER
(REC/RDY ALL)
Do this!
AUTO- RETURN RELATIVE TOUCH
REC SENSE
LATCH READ TRIM OFF
AUX AUX EQ
ON
(SEND) (SEND (PLUG-IN)
MUTE)
DM2000 Version 2—Owner's Manual
233