Yamaha DM2000 Owner's Manual page 315

AUTOPAN
Two input, two output autopanner.
Parameter Range
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
1
DIR.
WAVE Sine, Tri, Square
LSH F 21.2 Hz–8.00 kHz
LSH G –12 to +12 dB
EQ F 100 Hz–8.00 kHz
EQ G –12 to +12 dB
EQ Q 10.0–0.10
HSH F 50.0 Hz–16.0 kHz
HSH G –12 to +12 dB
SYNC OFF/ON
2
NOTE
1. L<->R, L—>R, L<—R, Turn L, Turn R
2.
TREMOLO
Two input, two output tremolo effect
Parameter Range
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri, Square
LSH F 21.2 Hz–8.00 kHz
LSH G –12 to +12 dB
EQ F 100 Hz–8.00 kHz
EQ G –12 to +12 dB
EQ Q 10.0–0.10
HSH F 50.0 Hz–16.0 kHz
HSH G –12 to +12 dB
SYNC OFF/ON
1
NOTE
1.
HQ. PITCH
One input, two output high-quality pitch shifter.
Parameter Range
PITCH –12 to +12 semitones
FINE –50 to +50 cents
DELAY 0.0–1000.0 ms
FB. GAIN –99 to +99%
MODE 1–10
SYNC OFF/ON
1
NOTE
1.
Description
Modulation speed
Modulation depth
Panning direction
Modulation waveform
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
.
Description
Modulation speed
Modulation depth
Modulation waveform
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine FREQ.
Description
Pitch shift
Pitch shift fine
Delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
Pitch shift precision
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
(Maximum value depends on the tempo setting)
315
Effects Parameters
DM2000—Owner's Manual