Bus Outs; Patching Bus Outs To Outputs; Routing Input Channels To Bus Outs; Metering Bus Outs - Yamaha DM2000 Owner's Manual

9 Bus Outs

Patching Bus Outs to Outputs

Bus Outs can be patched to the Slot Outputs, Omni Outs, or the 2TR Digital Outputs. See
"Output Patching" on page 79 for more information.

Routing Input Channels to Bus Outs

Input Channels can be routed to the Bus Outs. See "Routing Input Channels" on page 93
for more information.

Metering Bus Outs

Bus Out signal levels can be metered on the Meter pages. See "Metering" on page 127 for
more information.

Monitoring Bus Outs

Bus Outs can be assigned to the CONTROL ROOM [ASSIGN 1] or [ASSIGN 2] button for
monitoring. See "Control Room Monitoring" on page 158 for more information.

Attenuating Bus Outs

Bus Out signals can be attenuated pre-EQ. See "Attenuating Signals" on page 130 for more
information.

EQ'ing Bus Outs

Each Bus Out features 4-band parametric EQ. See "Using EQ" on page 131 for more infor-
mation.

Grouping Master EQs

Bus Out EQs can be grouped with the EQs of other Output Channels. See "Grouping Out-
put Channel EQs" on page 135 for more information.

Bus Out Inserts

Internal effects processors and external signal processors can be patched into the Bus Outs
by using the Inserts. See "Using Inserts" on page 135 for more information.

Compressing Bus Outs

Signal dynamics can be controlled by using the Bus Out Compressors. See "Compressing
Channels" on page 137 for more information.

Grouping Master Compressors

Bus Out Compressors can be grouped with the Compressors of other Output Channels. See
"Grouping Output Channel Compressors" on page 140 for more information.
107
Bus Outs
DM2000 Version 2—Owner's Manual