Yamaha DM2000 Owner's Manual page 232

232
Chapter 19—Pro Tools Remote Layer
■ DYNAMICS
[THRESHOLD] control
If the ROUTING [6] button indicator is off, the [THRESHOLD] control adjusts the front
position. If the ROUTING [6] button indicator is lit, the control adjusts the front diver-
gence.
[RANGE/RATIO] control
If the ROUTING [6] button indicator is off, the [RANGE/RATIO] control adjusts the rear
position. If the ROUTING [6] button indicator is lit, the control adjusts the rear divergence.
[ATTACK] control
If the ROUTING [6] button indicator is off, the [ATTACK] control adjusts the F/R
(front/rear) position. If the ROUTING [6] button indicator is lit, the control adjusts the F/R
(front/rear) divergence.
[DECAY/RELEASE] control
If the ROUTING [6] button indicator is off, the [DECAY/RELEASE] control adjusts the
LFE level. If the ROUTING [6] button indicator is lit, this control adjusts the center per-
centage.
[HOLD/GAIN] control
Adjusts the channel volume.
■ PAN/SURROUND
[GRAB] button
Press this button, turning on the button indicator, then operate the Joystick to quickly set
the pan position.
Joystick
Operating the Joystick while the [GRAB] button indicator is turned on enables you to
quickly set the pan position.
DM2000 Version 2—Owner's Manual
DYNAMICS
DISPLAY
GATE / COMP
GATE
COMP
GATE ON COMP ON
PAN / SURROUND
L
DISPLAY
ODD
L R
THRESHOLD RANGE ATTACK DECAY
THRESHOLD RATIO ATTACK RELEASE
R
EVEN
LINK GRAB EFFECT
HOLD
GAIN