Adjusting The Display Contrast; Setting The Volume; Using Headphones; Performing The Iafc Automatic Adjustment - Yamaha Clavinova CLP-270 Owner's Manual

Before Using the Clavinova

Adjusting the display contrast

You can adjust the contrast of the display by turning the [CONTRAST] knob located to the right of the LCD.
A
C

Setting the volume

To adjust the volume, use the [MASTER VOLUME] dial located at the left of the panel. Play the keyboard to
actually produce sound while you adjust the volume.
The level
decreases.
MIN
MASTER VOLUME

Using headphones

Connect a pair of headphones to one of the [PHONES] jacks.
When the headphones are plugged into either of the [PHONES]
jacks, the internal speaker system is automatically shut off.
Two [PHONES] jacks are provided. Two sets of standard stereo
headphones can be plugged in. (If you are using only one pair of
headphones, you can plug them into either of these jacks.)
CAUTION
Do not use headphones at a high volume for an extended period of time.
Doing so may cause hearing loss.
Using the Headphone Hanger
A headphone hanger is included in the CLP-280/270
package so that you can hang the headphones on the
Clavinova. Install the headphone hanger using included
two screws (4 10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on the hanger. Otherwise, the Clavinova
or the hanger may be damaged.

Performing the iAFC automatic adjustment

The CLP-280/270 features an iAFC (Instrumental Active Field Control) effect. This produces sound from the
speaker located on the rear of the Clavinova, enhancing the reverberation and spaciousness of the sound.
In order to take full advantage of iAFC, perform the automatic adjustment. (page 82)
16
CLP-280/270 Owner's Manual
The level
CAUTION
increases.
Do not use the Clavinova at
a high volume level for a
long period of time, or your
hearing may be damaged.
MAX
CONTRAST
B
Use this knob.
NO YES
EXIT
D
TERMINOLOGY
MASTER VOLUME:
The volume level of the entire keyboard sound
TIP
You can also adjust the [PHONES] output level, AUX [IN]
input level and the AUX [OUT] output level (when "Vari-
able" is selected in "AuxOutLevel" on page 89) using the
[MASTER VOLUME] dial.
buttom surface
standard stereo phone plug
TIP
Optional headphones
HPE-160 Yamaha headphones.
TERMINOLOGY
CONTRAST:
difference between
brightness and darkness