Yamaha Clavinova CLP-270 Owner's Manual page 70

Detailed Settings
4.
Write, execute, or save the data.
There are two ways to respond to the messages.
If "Execute? " or "Start? " appears:
Press the B [+(YES)] button to display confirmation ("Sure? "). To
proceed, press the B [+(YES)] button again. The Clavinova displays
"Executing" and writes the data. When the operation is complete, it
displays "Completed" for three seconds, then returns to the previous
screen.
To cancel the operation, press the B [–(NO)] button instead of the B
[+(YES)] button.
When "Overwrite? " appears after the "Completed" message, press
the B [+(YES)] button.
If "Set? " appears:
Press the B [+ (YES)] button to execute the setting. The Clavinova
displays "Executing" and saves the data. When the operation is com-
plete, it displays "Completed" for three seconds, then returns to the
previous screen.
5.
Close the setting menu.
Press the [EXIT] button.
70
CLP-280/270 Owner's Manual
A
Quantize Execute?-->
Strength=100%
C
A
Main
Octave
C
B
NO YES
1/4
D
B
Set?-->
NO YES
0
D