Problem
The USB storage device is not rec-
ognized by the instrument.
The USB storage device has hung
up (stopped).
Cause
The USB storage device may not be
recognized by the instrument
depending on the timing of the
device connection or the setting of
the [SELECT] switch.
The USB storage device is not com-
patible with the instrument.
The USB storage device does not
operate properly.
Troubleshooting
Solution
Disconnect the USB storage device
and connect it again and select a
device using the [SELECT] switch.
To view the data of the USB storage
device on the CLP display, press the
[SONG SELECT] button to engage
song selection mode or press the
[FILE/SONG SETTING] button to
engage file/song setting mode. If
you try to engage these modes
before connecting the USB storage
device, press the [EXIT] button to
exit the mode and re-engage the
mode. If the device is still not recog-
nized, it may not be supported by
Yamaha. Only use devices sup-
ported by Yamaha (page 60).
Only use devices whose compatibil-
ity has been confirmed by Yamaha
(page 60).
Disconnect the device and connect
it to the instrument again.
CLP-280/270 Owner's Manual
103