Setting The Reverb Type - Yamaha Clavinova CLP-270 Owner's Manual

Setting the reverb type

[ReverbType]
TIP
You cannot set this parameter for the voice parts "Left" and
"LeftXLayer."
See the procedure on page 69.
A
Main
ReverbType
C
Setting range:
Room Simulates reverberation in a room.
Hall1 Simulates reverberation in a concert hall.
Hall2 Reverberation is slightly longer than that of
"Hall1."
Stage Reverberation suitable for a solo instrument
sound.
Plate Reverberation from the vibration of a metal
plate.
Setting the reverb depth
[ReverbSend]*
TIP
The reverb effect is not applied if the ReverbSend parameter is
set to "0."
See the procedure on page 69.
A
Main
ReverbSend
C
In Dual mode:
A
MainxLayer
ReverbSend(E.Piano1) 26
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
Detailed settings for the voices [VOICE SETTING]
B
Set?-->
NO YES
Hall1
D
B
Set?-->
NO YES
14
D
B
Set?-->
NO YES
D
Selecting the chorus type
[Chorus Type]
TIP
You cannot set this parameter for the voice parts "Left" and
"Left Layer."
See the procedure on page 69.
A
Main
ChorusType
C
Setting range:
Chorus Adds a rich, spacious sound.
Celeste Adds swell and a spacious sound.
Flanger Adds swell effects of an ascending or
descending jet plane.
Setting the chorus depth
[ChorusSend]*
See the procedure on page 69.
A
Main
ChorusSend
C
In Dual mode:
A
MainxLayer
ChorusSend(E.Piano1) 72
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
CLP-280/270 Owner's Manual
B
Set?-->
NO YES
Chorus
D
B
Set?-->
NO YES
48
D
B
Set?-->
NO YES
D
77