Yamaha Clavinova CLP-270 Owner's Manual page 28

Selecting and Playing Voices
[REVERB]
This control adds reverberation to the sound by simulating the natural reverberation of a concert hall.
Procedure
Pressing the [REVERB] button repeatedly toggles the reverb on
and off.
Even if the reverb effect is turned off, a "soundboard reverb" effect
will be applied when the GrandPiano1 or GrandPiano2 voice is
selected.
[CHORUS]
This control adds spread and spaciousness to the sound.
Procedure
Pressing the [CHORUS] button repeatedly toggles the chorus on
and off.
You can turn the chorus effect on and off by pressing the [CHORUS]
ON/OFF buttons on the panel and by setting the Chorus On Off
parameter in the VOICE SETTING menu (see page 78). The [CHO-
RUS] ON/OFF button setting on the panel is temporary. That is, if
you select another voice, the chorus setting for the previous voice is
cancelled. The Chorus On Off parameter setting is saved for each
voice. That is, if you select a given voice, the chorus setting is auto-
matically turned on or off according to the saved chorus setting.
28
CLP-280/270 Owner's Manual
TIP
You can select a reverb type via
the Reverb Type parameter in
the "VOICE SETTING" menu,
and adjust the reverb depth for
the selected voice via the
Reverb Send parameter. (See
page 77.)
TIP
Normal setting = ON
TIP
You can select a chorus type
via the Chorus Type parameter
in the "VOICE SETTING" menu,
and adjust the chorus depth for
the selected voice via the Cho-
rus Send parameter. You can
also turn chorus on or off via the
Chorus On Off parameter. (See
page 77.)
TIP
Normal Setting:
The normal chorus on/off set-
ting is different for each voice.