Recording A Performance Of Several Different Parts - Yamaha Clavinova CLP-270 Owner's Manual

Recording a performance of several different parts

2 3 2
EXTRA
PARTS
REC
SONG KEYBOARD REPEAT
NEW SONG
MIN MAX
MASTER VOLUME SONG BALANCE DEMO SONG
1 2
Procedure
1.
Select "New Song" and a voice for recording.
Follow the same operation steps as in "Recording a performance with-
out specifying the recording part" above. Refer to steps 1-2 on
page 35.
2.
Specify the recording parts and engage the record
mode.
Record to the right (part 1) or left (part 2) part:
Press and hold down the [REC] button and press the [RIGHT]/[LEFT] but-
ton.
Record to the extra parts (part 3-16):
Press the [FILE/SONG SETTING] button and press the A [–][+] button to
display "RecExtraPartsCh." Press the D [–][+] buttons to specify a recording
part. The specified part is assigned to the [EXTRA PARTS] button.
After specifying the recorded part to the [EXTRA PARTS] button, press and
hold down the [REC] button and press the [EXTRA PARTS] button.
The [REC] and specified part indicators flash in red.
(To stop recording, press the [REC] button again or press the [STOP] but-
ton.)
Record standby screen
A
SongRecording
-----:NewSong
C
Set the tempo, if necessary.
If this record standby screen does not appear, press the [SONG SELECT]
button once.
If you don't want to hear the right/left part while you record, press the
[RIGHT]/[LEFT] button so that its indicator is turned off.
METRONOME
SONG
RIGHT A
LEFT SELECT ON/OFF SETTING
STOP PLAY/PAUSE FILE/SONG
SETTING DOWN UP
SYNC START
TEMPO
C
4
BAR 001
Recording Your Performance
1
CONTRAST GRAND GRAND E.PIANO E.PIANO HARPSI-
B
PIANO 1 PIANO 2 1 2 CHORD
NO YES
CHURCH JAZZ SYNTH.
ORGAN ORGAN STRINGS CHOIR
EXIT
D
Set the tempo in Step 2.
See page 42 for more informa-
tion on recording in Dual/Split
mode.
B
NO YES
D
CLP-280/270 Owner's Manual
iAFC
E.CLAVI- VIBRA- VOICE
REVERB CHORUS SETTING
CHORD PHONE GUITAR SETTING
WOOD BRILLIANCE
PAD BASS E.BASS XG SPLIT MELLOW BRIGHT FUNCTION
VOICE
TIP
TIP
39