Yamaha Clavinova CLP-270 Owner's Manual page 80

Detailed settings for the voices [VOICE SETTING]
Adjusting the low-range gain
(amount of boost/cut) of the equal-
izer* [EQ LowGain]
See the procedure on page 69.
A
Main
EQ LowGain
C
Setting range:
–12 - +12 dB
Adjusting the high-range frequency
of the equalizer*
[EQ HighFreq. (EQ H.Freq)]
See the procedure on page 69.
A
Main
EQ HighFreq.
C
Setting range:
500 Hz - 16.0 kHz
Adjusting the high-range gain
(amount of boost/cut) of the equal-
izer* [EQ HighGain]
See the procedure on page 69.
A
Main
EQ HighGain
C
Setting range:
–12 - +12 dB
80
CLP-280/270 Owner's Manual
B
Set?-->
NO YES
0
D
B
Set?-->
NO YES
500
D
B
Set?-->
NO YES
0
D
Setting the touch sensitivity
[TouchSense]*
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 69.
A
Main
TouchSense
C
In Dual mode:
A
MainxLayer
TouchSense(GrndPno1) 64
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 (softest) - 64 (largest changes in the level) - 127 (loud-
est and fixed)
B
Set?-->
NO YES
64
D
B
Set?-->
NO YES
D