Using Markers - Yamaha AW 1600 Owner's Manual

"Markers" are symbols that you assign at desired locations in a song, so that you can move
quickly to a desired point. You can assign up to 99 markers in each song. Use the [
to find and move to markers.
1
Move to the position in the song at which
you want to assign a marker.
You can assign a marker whether the song is playing
or stopped.
2
Press the [MARK] key.
The top line of the display will briefly indicate
"MARK POINT SET." This indicates that a marker
has been set. A new marker will be added each time
you press the [MARK] key.
Markers are automatically numbered 1–99 starting at
the beginning of the song. If you register a new marker
between two existing markers, subsequent markers
will be automatically renumbered upward.
Register a new marker
HINT
• Marker settings are stored on the hard disk as part of the
song.
• Markers can be deleted ( → p. 69) or moved ( → p. 68) as
desired.
• If you press the [MARK] key at a location in which a marker
has already been registered, the display will indicate "CAN-
NOT SET MARK," and a new marker will not be created.

Using markers

3
Press the [
marker, or press the [
the next marker.
The song will move to that location, and an icon will
appear at the left of the counter to indicate the cur-
rently selected marker number.
This icon will remain visible until you play or rewind/
fast-forward past the previous or next locate point or
marker location.
Markers that you register are displayed in the TRACK
screen VIEW page or PAD page as shown below.
NOTE
• Markers other than the marker displayed at the left of the
counter are shown as icons without a number, and indicate
their approximate location.
HINT
• When creating an audio CD, you can use markers to divide
the stereo track into the tracks that will be written to the audio
CD ( → p. 102).
Using markers
]/[ ] keys
] key to locate to the previous
] key to locate to
Marker icon
Marker icon
AW1600 Owner's Manual
7
67