Yamaha AW 1600 Owner's Manual page 197

■ REV->PAN
Parameter Range
REV TIME 0.3 – 99.9 s
INI.DLY 0.0 – 500.0 ms
HI.RATIO 0.1 – 1.0
DIFF. 0 – 10
DENSITY 0 – 100%
HPF Thru, 21.2 Hz – 8.0 kHz
LPF 50 Hz – 16.0 kHz, Thru
FREQ. 0.05 – 40.00 Hz
DEPTH 0 – 100%
DIR. L<->R, L—>R, L<—R, Turn L,
Turn R
WAVE Sine, Tri, Square
REV BAL. 0 – 100%
MIX BAL. 0 – 100 [%]
■ DELAY+ER.
Parameter Range
DELAY L 0.0 – 1000.0 ms
DELAY R 0.0 – 1000.0 ms
FB.DLY 0.0 – 1000.0 ms
FB.GAIN –99 to +99%
HI.RATIO 0.1 – 1.0
TYPE S-Hall, L-Hall, Random,
Revers, Plate, Spring
ROOMSIZE 0.1 – 20.0
LIVENESS 0 – 10
INI.DLY 0.0 – 500.0 ms
DIFF. 0 – 10
DENSITY 0 – 100%
ER NUM. 1 – 19
HPF Thru, 21.2 Hz – 8.0 kHz
LPF 50 Hz – 16.0 kHz, Thru
DLY/ER 0 – 100%
MIX BAL. 0 – 100 [%]
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Modulation speed
Modulation depth
Panning direction
Modulation waveform
Reverb and panned reverb balance (0% = panned reverb, 100% = reverb)
Mix balance of the effects and dry sounds
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
High-frequency feedback ratio
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reverb diffusion (left-right reverb spreed)
Reverb density
Number of early reflections
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and early reflections balance (0% = early reflections, 100% = delay)
Mix balance of the effects and dry sounds
Effects Parameters
Description
Description
AW1600 Owner's Manual
197