Yamaha AW 1600 Owner's Manual page 192

Effects Parameters
■ TREMOLO
Parameter
FREQ. 0.05 – 40.00 Hz
DEPTH 0 – 100%
WAVE Sine, Tri, Square
LSH F 21.2 – 8.00 k [Hz]
LSH G –12 to +12 [dB]
EQ F 100 – 8.00 k [Hz]
EQ G –12 to +12 [dB]
EQ Q 10 – 0.10
HSH F 50.0 – 16.0 k [Hz]
HSH G –12 to +12 [dB]
MIX BAL. 0 – 100 [%]
■ HQ.PITCH (Effect 2 only)
Parameter
PITCH –12 to +12 semitones
FINE –50 to +50 cents
DELAY 0.0 – 1000.0 ms
FB.GAIN –99 to +99%
MODE 1 – 10
MIX BAL. 0 – 100 [%]
■ DUAL PITCH
Parameter
PITCH 1 –24 to +24 semitones
FINE 1 –50 to +50 cents
PAN 1 L16–1, C, R1–16
DELAY 1 0.0 – 1000.0 ms
FB.G 1 –99 to +99%
LEVEL 1 –100 to +100%
PITCH 2 –24 to +24 semitones
FINE 2 –50 to +50 cents
PAN 2 L16–1, C, R1–16
DELAY 2 0.0 – 1000.0 ms
FB.G 2 –99 to +99%
LEVEL 2 –100 to +100%
MODE 1 – 10
MIX BAL. 0 – 100 [%]
■ ROTARY
Parameter
ROTATE STOP, START
SPEED SLOW, FAST
DRIVE 0 – 100
ACCEL 0 – 10
LOW 0 – 100
HIGH 0 – 100
SLOW 0.05 – 10.00 Hz
FAST 0.05 – 10.00 Hz
MIX BAL. 0 – 100 [%]
192
AW1600 Owner's Manual
Range
Modulation speed
Modulation depth
Modulation waveform
Low-shelving filter frequency
Low-shelving filter gain
Parametric equalizer center frequency
Parametric equalizer gain
Parametric equalizer band width
High-shelving filter frequency
High-shelving filter gain
Mix balance of the effects and dry sounds
Range
Pitch shift
Pitch shift fine
Delay time
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
Pitch shift precision
Mix balance of the effects and dry sounds
Range
Channel 1 pitch shift
Channel 1 pitch shift fine
Channel 1 panpot
Channel 1 delay time
Channel 1 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
Channel 1 level (plus values for normal phase, minus values for reverse phase)
Channel 2 pitch shift
Channel 2 pitch shift fine
Channel 2 panpot
Channel 2 delay time
Channel 2 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
Channel 2 level (plus values for normal phase, minus values for reverse phase)
Pitch shift precision
Mix balance of the effects and dry sounds
Range
Rotation stop, start
Rotation speed (see SLOW and FAST parameters)
Overdrive level
Accelation at speed changes
Low-frequency filter
High-frequency filter
SLOW rotation speed
FAST rotation speed
Mix balance of the effects and dry sounds
Description
Description
Description
Description