Parts of the Reader
1. LED
2. Cable Release Hole
Selecting the Interface Type
Upon completing the physical connection between the
reader and its host, proceed directly to Interface Selection
below for information and programming for the interface
type supported by the reader and scan the appropriate bar
code to select your system's correct interface type, accord-
ing to your application.
For interfaces other than those listed in this manual, see
the Wasp WDI4700 Product Reference Guide (PRG), avail-
able online at
Interface Selection
The reader will support all the following host interfaces:
•
RS-232 STD
•
RS-232 WN
•
IBM46XX port 9b (a specific cable' s required)
•
USB HID POS
•
USB Toshiba TEC
•
USB (Keyboard, COM, OEM)
•
USB Composite (Keyboard + COM)
•
USB for Magellan Scanners
•
Keyboard Wedge
Quick Reference Guide
www.waspbarcode.com.
3. Scan Window
4. Trigger
Parts of the Reader
7