Appendix B Windows Tcp/Ip Setup; Overview; Tcp/Ip Settings - XiNCOM Twin WAN XC-DPG402 User Manual

Appendix B
Windows TCP/IP Setup

Overview

T CP/IP Sett ings
I f using t he defau lt XC-DPG Tw
95/98/ME/2000 TCP/IP settings, no changes need to be made.
•
By defa ult, the XC-DPG Twin WAN Router will act as a DHCP Server, automatically providing a
suitable IP Addr ess (and rela
•
For all n on-Serv er versions of Windows, the default TCP/IP setting is to act as a DHC
•
If you wish to ch eck your TCP/IP settings, the proce
•
If yo ur LAN has a Router, the LAN Administrator must re-configure the Router itself. Refer to
Cha pter 5 – Adv anced L
Checking TCP/IP Settings - Windows 9x/ME:
1. Select Control Panel - Network. You should see a screen like the following:
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like the following.
in WAN Router settings, and the default Windows
ted information) to each PC when the PC boots.
AN Setup for details.
Figure 38: Network Configuration
dure is described in the following sections.
XiNCOM Corp.
P client.
Page 70