Connecting To The Virtual Servers - XiNCOM Twin WAN XC-DPG402 User Manual

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the XC-
DPG Twin WAN Router's Internet IP Address (the IP Address allocated by your ISP).
e.g.
http://205.20.45.34
ftp://205.20.45.34
•
To Internet users, all virtual Servers on your LAN have the same IP Address. This IP Address is
allocated by your ISP.
•
This address should be static, rather than dynamic, to make it easier for Internet users to connect
to your Servers. However, you can use the Dynamic DNS feature (explained later in this chapter)
to allow users to connect to your Virtual Servers using a URL, instead of an IP Address.
e.g.
HTTP://my_domain_name.dyndns.org
FTP://my_domain_name.dyndns.org
Settings – Virtual Server
Enable Use this to Enable or Disable each Virtual server as required.
Server Type Select the desired Server type. If the type of Server you wish to use is not listed,
use the Custom Virtual Server screen to define your own type.
LAN IP Enter the IP address of the PC on your LAN which is running the required Server
Address software.
Each PC should have a fixed IP address, or have a reserved IP address. (See the
Host IP section earlier in this chapter for details on reserving an IP address.)
Figure 18 Virtual Server
XiNCOM Corp.
Page 35