3: Advanced Port Setup; Overview; Port Options - XiNCOM Twin WAN XC-DPG402 User Manual

3: Advanced Port Setup

Overview

There are 3 screens in this section:
•
Port Options contains some options which can be set on either or both WAN ports. For most
situations, the default values are satisfactory.
•
Load Balance screen is only functional if you are using both WAN ports. It allows you to
determine the proportion of WAN traffic sent through each port.
•
Advanced PPPoE setup is required if you wish to use multiple sessions on one or both of the
WAN ports. It can also be used to manually connect or disconnect a PPPoE session. Otherwise,
this screen can be ignored.
•
Advanced PPTP setup is required if using the PPTP connection method.

Port Options

Figure 9: Port Options XC-DPG502 shown
XiNCOM Corp.
Page 21