Policy Configuration - XiNCOM Twin WAN XC-DPG402 User Manual

Twin wan xc-dpg series
Table of Contents

Advertisement

Policy Configuration

When you use QoS, you must define the policies to make packets recieve higher priority
for pass through.
Data – Policy Configuration.
Network
This section identifies each policy
Admission
Policy
Page 62
Figure 33 Policy Configuration
Policy Name List – When adding a new Policy, ignore this list. To edit an
existing entry, sele
ct it from the list, an
fields will then be updated for the selected entry.
Policy Name – Enter a suitable name. Generally, you should use the "Policy
Name" for the network traffic.
So
urce Address – Define the source address of packets here. It has two
types like IP
address or MAC address. If you select IP address, you can
define IP address range, otherwise define up to four MAC addres
Destination Address – Define the destination address of packets here. The
explanation is as the same as above.
Protocol Type – The field defines traffic packet type, i.e. IP, TCP and UDP.
Source Port – Define the source port of packets here.
Destination Port – Define the destination port of packets here.
Priority Queue
– It defines a packet if it meets all conditions defined above, it
will be serviced with some priority level.
d click the "Select" button. The data
ses.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Twin wan xc-dpg502

Table of Contents