SNMP
This section is only useful if you have SNMP (Simple Network Management Protocol) software on
your PC. If you have SNMP software, you can use a standard MIB II file with the XC-DPG Twin WAN
Router.
Settings – SNMP
•
System
Information
•
•
Trap Targets
Enter the IP address of any targets (PCs running SNMP software) to which you
want traps to be sent. All traps are level 1.
Page 44
Figure 23: SNMP
Contact Person – The name of the person responsible for this device.
Device name – The name of the XC-DPG Twin WAN Router.
Physical Location – The location of the XC-DPG Twin WAN Router.