Gauge Menu
This menu contains the parameters relating to functioning of the active
gauge.
Figure 42
PRESSURE UNIT: selects the unit of measurement of the pressure
▪
GAUGE MODEL ID: it shows the gauge model identified by the controller.
If there are more model with the same identification the user can select
the right gauge connected
TwisTorr 305 FS Remote Controller User Manual / 87-901-059-01
used to show this on the display, for display on the serial line and for
setting of the setpoint and autopressure thresholds. Possible options:
mbar
▪
Pascal
▪
Torr
▪
Technical Information
Programming
161/190
8