Agilent Technologies TwisTorr 305 FS User Manual page 156

8 Technical Information
Programming
Input/Output Menu
This menu contains parameters that determine the operating mode of the
inputs and outputs of the controller.
Figure 40
▪
156/190
START MODE: Permits selection of one of the three types of
functioning of the START/STOP and INTERLOCK inputs:
START/INTERLOCK: The pump is started if the START/STOP
▪
input is activated and is stopped if the START/STOP input is de-
activated. The interlock input must be constantly active
(INTERLOCK TYPE parameter = continuous) or may be active only
at the time of starting (INTERLOCK TYPE parameter = impulsive).
TwisTorr 305 FS Remote Controller User Manual / 87-901-059-01