Agilent Technologies TwisTorr 305 FS User Manual page 105

All the logic output from the controller must be connected at P2 mating
connector. The following table describes the signals available on the
connector.
The following figure shows a typical logic output connection (relay coil)
but any other device may be connected e.g. a LED, a computer, etc., and
the related simplified circuit of the controller.
Figure 12
Minimum 100 kΩ
Figure 13
TwisTorr 305 FS Remote Controller User Manual / 87-901-059-01
Minimum 1 kΩ
Digital Output Connection Example
Analog Output Connection Example
Technical Information
Controller Connection
J 1
8
+24 V
105/190