Agilent Technologies TwisTorr 305 FS User Manual page 104

8 Technical Information
Controller Connection
Pins Name
5-com Soft Start
The following figure shows a typical contact logic input connection and
the related simplified circuit of the controller.
Figure 10
J1 – Output
Figure 11
104/190
Description
Contact closed= Active
Contact open= Inactive
If active before the start command
activates the spft start procedure.
To be used only at first pump run-
up.
Typical logic input connection
Logic output connector
TwisTorr 305 FS Remote Controller User Manual / 87-901-059-01
Electrical Note
Optically isolated Active only in
Vlow, max = 10v Remote Mode
Imax = 5mA operation, and
Imin (on) = 2mA in STOP
status.