Agilent Technologies TwisTorr 305 FS User Manual page 158

8 Technical Information
Programming
▪
▪
▪
158/190
START OUT MODE: Selects the operating mode of the START output.
Possible options:
RUNNING: the output is active when the pump is driven
▪
STARTING: the output is active only during acceleration ramp-up.
▪
SPEED OUT MODE (KRPM/Hz): permits selection of the unit of
measurement of the speed of rotation shown on the display of the
controller.
This setting acts only on the measurement shown on the display.
Possible options:
KRPM
▪
Hz
▪
LCD CONTRAST
TwisTorr 305 FS Remote Controller User Manual / 87-901-059-01