Printing On Envelopes - Xerox COLORQUBE 8570 User Manual

Printing

Printing on Envelopes

This section includes:
• Envelope Printing Guidelines
• Printing on Envelopes from Tray 1
• Printing on Envelopes from Tray 2, 3, 4, or 5
Envelopes can be printed from any tray as long as the tray supports the type of envelope you are using.
For information on supported envelope types by tray, see
Envelope Printing Guidelines
• Successful envelope printing is highly dependent on the quality and construction of the envelopes.
Use only paper envelopes specified for use with your printer. For details, see
and Weights on page 55.
• Maintain constant temperatures and relative humidity where envelopes are stored and used.
• Store unused envelopes in their packaging to avoid the effects of moisture and dryness, which can
affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal before
or during printing.
• Avoid padded envelopes; purchase envelopes that lie flat on a surface.
• Remove air bubbles from the envelopes before loading them into the tray by setting a heavy book
on top of the envelopes.
• Do not use envelopes with windows or clasps.
• Use envelopes with diagonal seams, not side seams.
CAUTION: Never use envelopes with windows or metal clasps; they can damage the printer.
Damage caused by using unsupported envelopes is not covered under the Xerox warranty, service
agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the
United States and Canada. Coverage may vary outside these areas; please contact your local
representative for details.
70 ColorQube 8570/8870 Color Printer
User Guide
on page 70
on page 71
on page 72
8X70-088
Supported Media on page 53.
Supported Paper Sizes
8X70-089