Xerox COLORQUBE 8570 User Manual page 174

Troubleshooting
7. Select the number of the weak or missing jet (1 to 309) and then press OK to confirm the
selection.
Note: If you need to substitute more jets, select Save Change and Select Another Jet and repeat
steps 6 and 7.
Select Save Change and Exit > OK to complete the procedure.
8.
Disabling Jet Substitution Mode
1. On the printer control panel, select Troubleshooting and then press the OK button.
2. Select Print Quality Problems > OK.
3. Select Eliminate Light Stripes > OK.
4. Select Jet Substitution Mode > OK.
Select Turn Jet Substitution Mode Off > OK.
5.
Note: Any saved and stored jobs on the printer's hard drive, if the hard drive option is present and
enabled, must be resubmitted to print correctly while Jet Substitution is enabled.
174 ColorQube 8570/8870 Color Printer
User Guide