Ordering Crus And Other Supplies - Xerox WorkCentre Pro 75 Operator's Manual

Operator Guide

Ordering CRUs and other supplies

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
• Developer Collector Bottle
If a replacable item must be changed, a message will appear on
the controller.
To replace these units, simply follow the instructions provided
with each replacement box. The fusers are to be retained for
repair or returned by the Service Representative. The
Xerographic CRU is still a customer replaceable unit and can be
returned in the box with the prepaid return label.
Instructions for replacing the Dry Ink Cartridge are also found
inside the front door of the machine.
The telephone numbers for placing orders are shown in
1.
Table 4-1. Telephone numbers for orders
Type of Order
Supplies
CRUs
NOTE: The CSE is responsible for replenishing the DT/DP 75/
90 Fuser CRUs and the Paper Feed Rolls for the customer and
for maintaining spares of these parts on site. Only the XCRU is
ordered from the Welcome Center. In an emergency situation,
the FCRU and Paper Feed Rolls can be ordered through the
Welcome Center.
For information about CRUs and consumable supplies, refer to
the DocuTech/DocuPrint 75/90 and DocuPrint 75 MX Installation
Planning Guide..
Number to Call
USA: (800) 822-2200 (T&M)
Canada - English: (800) 668-0199
Canada - French: (800) 733-9400 (T&M)
Xerox Europe: Contact your local representative.
DMO: Contact your local representative.
USA: (800) 821-2797 (FSMA)
Canada: (800) 668-0199(FSMA)
Canada: (800) 733-9400 (T&M)
Xerox Europe: Contact your local representative.
DMO: Contact your local representative.
Maintenance
Table 4-
4-15