Xerox WorkCentre Pro 75 Operator's Manual page 68

Paper and other stock
5-10
Table 5-6. Recommendations for loading special stock
Stock Type Common Use
Pre-printed and Common
letterhead correspondence,
mailings and
advertising
materials
Reinforced Mylar Ringed binders
edge
3 or 4 holes
Card stock Covers, signs
Tabs Separators within
a document
Transparencies Presentations
Recommendation
• Use ultra-violet cured or
oxidative inks to extend the life
of the Feed Roll Cartridges.
• Load face up in Trays 1-4.
• Load face down in Trays 5-6.
• Load reinforced edge on the
right in Trays 1-4.
• Load reinforced edge on the
left in Trays 5-6.
• Use long-edge feed only.
• Feed from the Bypass Tray for
best results.
• Use the Tab Tray insert. Can
be obtained from your Sales
Representative at no charge.
Part number 98K87320.
• Feed from trays 2, 3, and 4
only.
• Load with the tabs on the right.
• Use clear or white-striped
transparencies. Do not use
paper-backed transparencies.
• Feed from the Bypass Tray
(Tray 5) preferred.
• Refer to the label on the tray
for the orientation of striped
transparencies.
• When using transparencies
with removable stripes, load
with the stripe up in Tray 5 and
the stripe down in Tray 1.
• Do not duplex.
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Operator Guide