Introduction; About This Guide; Powering Down The System - Xerox WorkCentre Pro 75 Operator's Manual

About this guide

Powering down the system

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
1.

Introduction

The DocuTech/DocuPrint 75/90 and DocuPrint 75 MX Operator
Guide is one of a number of publications which make up the
Xerox Document Services Platform Series.
This guide is intended for Xerox DocuTech/DocuPrint 75/90 and
DocuPrint 75 MX and DocuPrint 75 MX operators whose job
consists of the routine operation of this printing system:
operating each of the system components, running print jobs,
solving simple system problems, and performing basic
maintenance tasks, such as replenishing printer supplies.
If you are a lead operator, or your job involves some
programming or systems administration tasks, as well as
operating the DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
system, use the on-line help system and the other documents in
the Xerox Document Services Platform Series to supplement the
information in the DocuTech/DocuPrint 75/90 and DocuPrint 75
MX Operator Guide.
Users should have an understanding of the operations of the
DocuSP controller and be familiar with Solaris and basic UNIX
commands.
Before using this Guide, become familiar with its contents and
conventions.
If it is necessary to power down the system, refer to the section
entitled Power-off procedures located in the Maintenance
chapter of this Operator Guide. Never switch off the printer
power switch or the circuit breakers except in the case of an
emergency or unless you are instructed to do so by this Operator
Guide.
1-1