Output Settings Tab Settings - Xerox WorkCentre M24 User Manual

Output Tray
Paper Detect by Tray

Output Settings Tab Settings

Output Size
Settings
Specify whether Finisher is installed and the type.
Specify either Statement Paper Detection, or A5 Paper Detection.
This section describes the settings in the Output Settings tab.
• You can restore defaults by selecting the Restore
Defaults button.
Output Paper
Select the size of the paper used for output. The output is
automatically enlarged or reduced, depending on the paper size
selected in the Output Size and the paper size selected in the
Paper tab.
Example: When you select 8 1/2 x 11 inches in Paper size
in the Paper tab and 11 x 17 inches is selected in the
Output Size, the output is automatically enlarged and
printed.
When None is selected the job is printed based on the paper size
selected in the application.
U G ( P )
S E R U I D E R I N T
2 – 1 3