Xerox WorkCentre M24 User Manual page 429

Fault Code
016-749
016-757
016-758
016-759
016-760
016-761
016-778
016-779
016-780
016-781
016-782
• Cause - A JCL command syntax error occurred.
• Remedy - Confirm the print settings, or correct the JCL
command.
• Cause - The entered password is wrong.
• Remedy - Enter the correct password.
• Cause - The account is not registered as an authorized copy
user.
• Remedy - Contact the System Administrator.
• Cause - The maximum number of copies has been reached.
• Remedy - Contact the System Administrator.
• Cause - An error occurred during PostScript processing.
• Remedy - Set Print Mode to Print Priority, or increase the
size of the print page buffer, or increase PostScript memory.
• Cause - An error occurred during image processing.
• Remedy - Set Print Mode to Speed Priority and instruct
printing again. If this does not remedy the problem, print
using Ensure Print.
• Cause - Conversion of the scanned image was discontinued
due to insufficient hard disk space.
• Remedy - Delete unwanted data from the hard disk to
increase hard disk space.
• Cause - An error occurred during conversion processing of
the scanned image.
• Remedy - Instruct scanning again.
• Cause - An error occurred on the hard disk during conversion
processing of the scanned image.
• Remedy - A probable cause is hard disk malfunction. For
information about replacing hard disks, contact your Xerox
Customer Support Center.
• Cause - Could not connect to the server during file
forwarding by Scan Services.
• Remedy - Ask the network administrator to check the
network environment or server environment.
• Cause - Could not login to the server during file forwarding by
Scan Services.
• Remedy - Check the login user name, password, and other
information.
U G
S E R U I D E
Cause/Remedy
( T )
R O U B L E S H O O T I N G
5 – 2 3