Shielding - Siemens SINAMICS S120 Manual

Motor connection, shield support and fabrication
4.1 Motor plug connector for Motor Modules 3 A ... 30 A
Figure 4-4
4.1.5.2

Shielding

Shield for 50 mm modules and 100 mm modules (30 A, 2 x 18 A)
Shield connection
The shield is connected through the shield connecting plate, which is screwed to the Motor
Module, and a shield connecting terminal. The shield connection clamp with two pressure
plates for a Double Motor Module is illustrated in the diagrams below.
Shield connection plate
82
Connecting the power cables to the Motor Module
Shield connection clamp with
pressure plates
screws
①
and knurled
②
Power Units in Booksize C/D-Type Format
Manual, 12/2018, 6SL3097-5AC20-0BP0
Shield connection