Siemens SINAMICS S120 Manual page 45

NOTICE
Use of incorrect DRIVE-CLiQ cables
Damage or malfunctions can occur on the devices or system when DRIVE-CLiQ cables are
used that are either incorrect or have not been approved for this purpose.
• Only use suitable DRIVE-CLiQ cables that have been approved by Siemens for the
NOTICE
Motor damage due to the use of an unsuitable third-party motor
The motor insulation is subject to higher stresses when operated with a converter. Damage
to the motor winding may occur as a result.
• Observe the notes in the System Manual "Requirements placed on third-party motors
Note
Malfunctions due to soiled DRIVE-CLiQ interfaces
Malfunctions can occur in the system through the use of soiled DRIVE-CLiQ interfaces.
• Cover unused DRIVE-CLiQ interfaces with the supplied blanking covers.
• Order any additional blanking covers with the article number 6SL3066-4CA00-0AA0 (50
covers).
Power Units in Booksize C/D-Type Format
Manual, 12/2018, 6SL3097-5AC20-0BP0
particular application.
(https://support.industry.siemens.com/cs/document/79690594)".
Motor Modules in booksize C/D-type format
3.2 Safety instructions for Motor Modules of C/D-type
43