Siemens SITRANS F Series Operating Instructions Manual page 152

Parameter lists
F.7 600-799
F.7 600-799
Param‐ Meter Display
eter ID
version view
600 All -
601 All -
602 All -
603 All -
610* All L1
611* All L1
612* All -
613* All -
614* All -
615* All L2
152
Parameter/data type
Log interval
Delay of weekly logging from
current day to first day logging
at 00:00:00
- Limit for too high consump‐
tion
Limit for too low consumption
Date of latest log period
Latest Log period totalized (1)
Latest Log period totalized (2) 0
Latest Log period fault status* No faults
Latest Log period status infor‐
mation*
Date of log period 2
Factory settings
Fixed parameter or meter data that are not changeable
Monthly
0
1 000 000
0
2000-01-01 T 00:00:00
Operating Instructions, 03/2020, A5E03071515-AH
Data range
Daily, Weekly (7 days), Monthly
0 to 30
-1x10 to 1x10
9 9
-1x10 to 1x10
9 9
year-month-day T hours:mi‐
nutes:seconds
Active faults in log period;
1: Insulation error
2: Coil current error
3: Amplifier overload
4: Database checksum error
5: Low power warning
6: Flow overflow warning
7: Pulse A overload warning
9: Consumption interval warning
10/L: Leakage warning
11/E: Empty pipe warning
12/C: Low impedance/ high con‐
ductivity warning
13/d: High flow limit warning
14/15/16: Not used
If none of the errors have been
logged, the message is "No
faults"
Meter operation conditions in
log period
1: Totalizer 1 or 2 changed or
reset
2: Tariff setting changed or reset
3: Tariff register changed or re‐
set
4: Date - time changed
5: Alarm active in logged period
(See alarm fault log for same pe‐
riod)
6: Fault log has been reset
7: HW lock broken
8: Power Up
If none of the information has
been logged, the message is
"No Faults"
SITRANS FM MAG 8000