Hard Drive Options; Removing A Hard Drive Blank; Scsi Hard Drive Guidelines - HP DL360 Reference And Troubleshooting Manual

Hard Drive Options

Removing a Hard Drive Blank (on page 49)
SCSI Hard Drive Guidelines (on page 49)
Installing a SCSI or SATA Hard Drive

Removing a Hard Drive Blank

SCSI Hard Drive Guidelines

When adding SCSI hard drives to the server or drive enclosure, observe the
following general guidelines:
The server supports two hot-plug SCSI hard drives.
Each SCSI drive must have a unique ID. The system automatically sets all
SCSI IDs.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
Hardware Options Installation 49