Dat Drive Problems; Data Read From The Drive Is Inconsistent, Or Drive Cannot Read Data; Drive Is Not Detected - HP DL360 Reference And Troubleshooting Manual

Data read from the drive is inconsistent, or drive cannot read data

Action:
1. Clean the drive and media.
2. If a paper or plastic label has been applied to the surface of the CD or DVD
in use, remove the label and any adhesive residue.
3. Be sure the inserted CD or DVD format is valid for the drive. For example,
be sure you are not inserting a DVD into a drive that only supports CDs.

Drive is not detected

Action:
1. Be sure no loose connections (on page 108) exist.
2. Refer to the drive documentation to be sure cables are connected as required.
3. Be sure the cables are working properly. Replace with known functional
cables to test whether the original cables were faulty.
4. Be sure the correct, current driver is installed.

DAT Drive Problems

List of Problems:
Sense error codes are displayed..................................................................................................113
DAT drive error or failure
DAT drive is providing poor performance
Latest firmware indicates a defective tape, or head clogs occur regularly
Other errors are occurring
Sense error codes are displayed
Action: Refer to the Troubleshooting DAT Drives white paper for information on
DAT drive sense error codes. Search for it on the HP website
(http://www.hp.com).
occurs...............................................................................................114
.................................................................................114
..........................................................................................................114
Troubleshooting 113
.................................114