HP DL360 Reference And Troubleshooting Manual page 9

Item Description
3 Internal health LED
4 External health LED
(power supply)
5 NIC 1 link/activity LED
6 NIC 2 link/activity LED
Server Component Identification
Status
Green = System health is normal.
Amber = System is degraded. To identify the component in a
degraded state, refer to system board LEDs.
Red = System critical. To identify the component in a critical
state, refer to system board LEDs.
Off = System health is normal (when in standby mode).
Green = Power supply health is normal.
Amber = Power redundancy failure occurred.
Off = Power redundancy failure has occurred. When the server
is in standby mode, power supply health is normal.
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, view the LEDs on the RJ-45 connector for status
by referring to the rear panel LEDs ("Rear Panel LEDs and
Buttons" on page 11).
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. View the LEDs
on the RJ-45 connector for status by referring to the rear panel
LEDs ("Rear Panel LEDs and Buttons" on page 11).
9