Program Heating And Cooling Temperatures - White Rodgers 1F95-71 Operation Manual

5. Press SET once. The display will show the
CLOCK
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either
reach the current day of the week.
7. Press RUN once. The display will show the
PRGM
correct time and room temperature alter-
nately.
Program Heating and Cooling
Temperatures
During programming, if you don't press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume
TIME or TIME until you
FWD BACK
programming after this happens, press
until you are at the point where you stopped
programming. Then you may continue to enter
your programs normally. If you want to stop
programming at any time, simply press
resume program operation.
SYSTEM
1. Press until HEAT is displayed.
SWITCH
2. Press VIEW once. The display will continue
TEMP
to show HEAT. Below HEAT is the letter A,
representing the first programmed heating
temperature (HEAT A). At the right of the
display is the currently programmed HEAT
A setting.
VIEW
PRGM
RUN to
PRGM
25